The C-10 Probetester is an automated equipment that measures electrical leakage on ultrasound probes during a disinfection cycle and rinses the probe afterwards.
Using the C-10 Probetester is an efficient way of knowing that the probe is electrically safe to use with a patient, that there are no damages on the surface that could impair the function of the probe and also adds safer and easier handling for the personnel by minimizing exposure to disinfection solutions.
C-10 Probetester ensures high quality by an effecient user independent repeatable fully automated process, enabling personnel to concentrate on other duties.
|
|
| C-10 ADVANTAGES |
User safety
Minimal user exposure to disinfection solutions. |
Patient safety
Verification that the probe has passed a disinfection cycle, and has no electrical leakage that might harm the patient. |
Examination safety
Verification that there are no bite holes or cracks on the isolation of the probe that can impair examination results. No risk for over exposure of disinfection solutions on the probe. |
Using the C-10 Probetester
Easy to use.
Cost efficient and highly affordable.
Saves manual labour.
|
|
TECHNICAL SPECIFICATIONS
|
|
|
Dimensions:
|
Height: 1650 mm
Width: 510 mm
Depth: 250 mm
|
Internal water pressure:
|
1,5-2 bar
|
Weight:
|
40 kg
|
Available options:
|
Additional probe connectors
(up to 4 different)
|
Electrical supply:
Noise level:
Process volume:
Water consumption:
|
220-250V AC, 50-60 Hz, 50 W
<60db
1,4 litres (without probe)
1,4 litres per cycle (without probe)
|
Applied standards:
|
ISO 15883-4:2008
93/42/EEC Annex V
(Class lla, rule 15)
EN 61010-1
IEC 61326-1 |
|
|
|
|
|
|
